LevelOne FGP-2472 - Manual (Page 239)

233
set
Syntax:
set get-community <community>
set set-community <community>
set trap <#> <ip> [port] [community]
Description:
The Set here is used for the setup of get-community, set-community, trap host ip,
host port and trap- community.
Argument:
<#>: trap number, range: 1 to 6
<ip>: ip address or domain name
<port>: trap port
<community>: community name
Possible value:
<trap number> : 1 to 6
<port> :1~65535
Example:
FGP-2472(snmp)# set get-community public
FGP-2472(snmp)# set set-community private
FGP-2472(snmp)# set trap 1 192.168.1.1 162 public
show
Syntax:
show
Description:
The Show here is to display the configuration of SNMP.
Argument:
None.
Possible value:
None.
Example:
FGP-2472(snmp)# show
SNMP : Enable
Get Community: public
Set Community: private [Enable]
Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public
Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public