LevelOne FGP-2472 - Manual (Page 53)

47
3-2-1.Port Status
The function Port Status gathers the information of all ports’ current status
and reports it by the order of port number, media, link status, port state, Auto-
Negotiation status, speed/duplex, Rx Pause and Tx Pause. An extra media type
information for the module ports 25 and 26 is also offered (See Fig. 3-11).
Function name:
Port Status
Function Description:
Report the latest updated status of all ports in this switch. When any one of
the ports in the switch changes its parameter displayed in the page, it will be
automatically refreshed the port current status about every 5 seconds.
Fig. 3-10
Parameter Description:
Port No:
Display the port number. The number is 1 – 26. Both port 25 and 26 are
optional modules.
Media:
Show the media type adopted in all ports. The Port 25 and Port 26 are
optional modules, which support either fiber or UTP media with either
Gigabit Ethernet (1000Mbps) or 10/100Mbps Fast Ethernet port. They
may have different media types and speed. Especially, fiber port has
comprehensive types of connector, distance, fiber mode and so on. The