LevelOne FGP-2472 - Manual (Page 148)

142
Function name:
Storm Setting
Function description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Fig. 3-64
Parameter description:
Storm Type:
Disable:
Disable the function of the bandwidth storm control.
Broadcast Storm Control:
Enable the function of bandwidth storm control for broadcast
packets.
Multicast Storm Control:
Enable the function of bandwidth storm control for multicast packets.
Unknown Unicast Storm Control:
Enable the function of bandwidth storm control for unknown unicast
packets. These packets are the MAC address that had not
completed the learning process yet.
Broadcast, Multicast, Unknown Unicast Storm Control:
Enable the function of bandwidth storm control for all packets in
transmission.
Storm Rate :
Set up the limit of bandwidth for storm type you choose. Valid value of
the storm rate ranges from 1-100 with the minimum unit of 1. And only
integer
is acceptable. Default is 100.