LevelOne FGP-2472 - Manual (Page 179)

173
Description:
To configure the settings related with 802.1X Radius Server.
Argument:
<ip> : the IP address of Radius Server, and the IP format is xxx.xxx.xxx.xxx
<port-number> : the service port of Radius Server(Authorization port),
range 1~65535
<secret-key> : set up the value of secret-key, and the length of secret-key is
from 1 to 31
Possible value:
<port-number> : 1~65535, default 1812
Example:
FGP-2472(802.1x)# set state 192.168.1.115 1812 WinRadius
set suppTimeout
Syntax:
set suppTimeout <port-range> <sec>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 30
Example:
FGP-2472(802.1x)# set suppTimeout 2 30
set txPeriod
Syntax:
set txPeriod <port-range> <sec>
Description:
A timer used by the Authenticator PAE state machine to determine when an EAPOL
PDU is to be transmitted.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 30
Example:
FGP-2472(802.1x)# set txPeriod 2 30
show mode
Syntax:
show mode
Description: