LevelOne IES-1081 User Manual
Page 84
Advertising
IES-1081 User Manual
Page 84
#
eload
reboot the switch
after completing the upgrade process.
Alarm Setting
Alarm-trigger if:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to enable or disable alarm trigger on interface.
3. Command Syntax:
(no) alarm-trigger if INTERFACE
INTERFACE specifies the interface.
Advertising