LevelOne IES-1081 User Manual
Page 85
IES-1081 User Manual
Page 85
4. Example:
The following example enables alarm trigger on interface fe1 to switch:
switch_a(config)#alarm-trigger if fe1
switch_a(config)#
Alarm-trigger power:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to enable or disable alarm trigger of power source.
3. Command Syntax:
(no) alarm-trigger power POWER
POWER specifies the power source.
4. Example:
The following example enables alarm trigger of power 1 to switch:
switch_a(config)#alarm-trigger power 1
switch_a(config)#
Reboot
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use reload command to restart switch.
3. Command Syntax:
reload
4. Example:
The following example specifies restarting switch:
switch_a#reload
switch_a login: