LevelOne IES-1081 - Manual (Page 86)

IES-1081 User Manual Page 86
Logout
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use logout command to exit from the Exec mode or Privileged Exec mode.
3. Command Syntax:
logout
4. Example:
The following example specifies to exit from the Exec mode or Privileged Exec mode.
switch_a>logout
switch_a login:
Port
Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan
Activities
Configuration
Admin Setting:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if )#
2. Usage:
Use the shutdown command to shut down the selected interface.
Use the no shutdown to disable this function.
3. Command Syntax:
(no) shutdown
4. Example:
The following example shows the use of the shutdown command to shut down the
interface fe1 (port 1):