Teledyne LeCroy FireInspector Automation Application Programming Interface - Manual (Page 42)

38
FireInspector Automation User’s Manual CATC Version 1.0
2.4.7 ITrace::ReportErrorSummary
Saves trace error summary information into specified text file.
Syntax
HRESULT ReportErrorSummary (
[in] BSTR file_name );
Parameters
• file_name – string providing the full pathname to file where error summary report is
created
Return values
• ANALYZERCOMERROR_UNABLESAVE – unable to create trace information report
Remarks
Creates error summary file if necessary. Stores error summary in specified file. Here is an
example of data stored using this method call:
Error report for Errors.fdb recording file.
_______|___________________________________________________
Bad Transaction Codes (1):
_______| 0.4;
_______|___________________________________________________
Bad Header CRCs (1):
_______| 0.0;
_______|___________________________________________________
Bad Data CRCs (1):
_______| 0.1;
_______|___________________________________________________
Bad PHY Packets (2):
_______| 0.6; 0.7;
_______|___________________________________________________
Bad Acknowledges (1):
_______| 0.3;
_______|___________________________________________________
Data Length/Payload Mismatches (0):
_______|___________________________________________________
Bad Reserved Fields (not all 0's) (1):
_______| 0.2;
_______|___________________________________________________
Example
WSH:
Set Analyzer = WScript.CreateObject("CATC.FwAnalyzer")
CurrentDir = Left(WScript.ScriptFullName,
InstrRev(WScript.ScriptFullName, "\"))
Set Trace = Analyzer.MakeRecording (CurrentDir &
"Input\test_ro.rec")
Trace.ReportErrorSummary CurrentDir &
"Output\error_summary.txt"