Teledyne LeCroy FireInspector Automation Application Programming Interface - Manual (Page 50)

46
FireInspector Automation User’s Manual CATC Version 1.0
2.4.11 ITrace::GetTriggerPacketNum
Retrieves trigger packet number.
Syntax
HRESULT GetTriggerPacketNum (
[out, retval] long* packet_number );
Parameters
• packet_number – points to long value where trigger packet number is retrieved
Return values
Remarks
Example
WSH:
CurrentDir = Left(WScript.ScriptFullName,
InstrRev(WScript.ScriptFullName, "\"))
Set Analyzer = WScript.CreateObject("CATC.FwAnalyzer")
Set Trace = Analyzer.MakeRecording (CurrentDir &
"Input\test_ro.rec")
TriggerPacket = Trace.GetTriggerPacketNum
Trace.Save CurrentDir & "Output\trigger_portion.fdb",
CInt(ErrorPacket)-5, CInt(ErrorPacket)+5
Trace.ExportToText CurrentDir &
"Output\trigger_portion.txt", CInt(ErrorPacket)-5,
CInt(ErrorPacket)+5
C++:
See an example for “ITrace::GetPacketsCount” on page 44.