Teledyne LeCroy FireInspector Automation Application Programming Interface - Manual (Page 86)

82
FireInspector Automation API User’s Manual CATC Version 1.0
Set Server Location
You need to identify the device upon which the client will be executing its
commands.
Step 1
With the FwAnalyzer Properties dialog box still open, click the
Location tab.
The Location
window displays.
Step 2
Select Run
application on
the following
computer.
Step 3 In the text box
below the
selected option,
enter the Host
Name or IP
address of the
FireInspector
host computer.
If you do not
know the name of
the host
computer, you
can browse to it using the Browse... button.
Step 4
Click OK.
The FwAnalyzer Properties dialog box closes. You will see the Dis-
tributed COM Configuration Properties utility.
Set Default DCOM Properties
The next configuration step is to enable DCOM on the remote computer.
This setting tells the client to execute FireInspector commands remotely on
the DCOM server rather than on itself. You will also set the default
authentication level, which sets packet-level security for the applications,
and the default impersonation level, which sets the level of permission for
the server application to perform tasks for the client application.
Step 1
In the Distributed COM Configuration Properties utility, click the
tab marked Default Properties.