Teledyne LeCroy FireInspector Automation Application Programming Interface - Manual (Page 64)

60
FireInspector Automation User’s Manual CATC Version 1.0
2.5.11 IRecOptions::Reset
Resets recording options to its initial state.
Syntax
HRESULT Reset ( );
Parameters
Return values
Remarks
For default values of recording options see the Remarks for Sections 2.5.1 to 2.5.10.
Example
WSH:
CurrentDir = Left(WScript.ScriptFullName,
InstrRev(WScript.ScriptFullName, "\"))
Set Analyzer = WScript.CreateObject("CATC.FwAnalyzer")
Set RecOptions = Analyzer.GetRecordingOptions
RecOptions.SetRecMode 2 ' Event trigger
RecOptions.SetBufferSize 1024*1024 ' 1Mb
RecOptions.SetPostTriggerPercentage 60 ' 60%
. . .
RecOptions.Reset
C++: