Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 13)

Performing a First Test Getting Started with the IBTrainer
CATC IBTrainer InfiniBand Exerciser, August 2002
13
How to Connect to the DUT
After you have:
• Connected the IBTrainer to your PC
• Started the software
• Turned on the DUT
you can establish the connection between the IBTrainer and the DUT:
1 Connect the DUT to the IBTrainer with the InfiniBand cable. The
InfiniBand port is located on the front of the IBTrainer.
The List of Available Generators dialog box should be opened.
2 Connect the IBTrainer to the DUT by clicking Connect.
The Link State dialog box opens. “Controlling the Link State of the
IBTrainer” on page 14 describes this dialog box in detail.
3 Click the button corresponding to the link state that you want to
reach.