Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 81)

Test Description Using the InfiniBand Compliance Test Suite
CATC IBTrainer InfiniBand Exerciser, August 2002
81
Packet Receive Statemachine MARKED
BAD PKT
TD_10.2.4.1.10
TD_10.3.1.1.9
Item Value
Name TD_10.2.4.1.10
Description The test is used to ensure that the DUT does not re-
spond to a packet where the ‘EGP’ of this packet is re-
placed by an ‘EBP’.
Topology Simple
Initial link state Active
Assertions v1c07-007#02.03
DUT Channel Adapter
Prerequisites SanityCheck
Test procedure A SubnDirectGet(PortInfo) packet is sent out, but with
'EBP' (End of Bad Packet) instead of 'EGP' (End of
Good Packet). No response is expected.
Item Value
Name TD_10.3.1.1.9
Description The test is used to ensure that the DUT does not re-
spond to a packet where the ‘EGP’ of this packet is
replaced by an ‘EBP’.
Topology Simple
Initial link state Active
Assertions v1c07-009#02.03
DUT Switch; Router
Prerequisites SanityCheck
Test procedure A SubnDirectGet(PortInfo) packet is sent out, but
with 'EBP' (End of Bad Packet) instead of 'EGP' (End
of Good Packet). No response is expected.