Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 84)

Using the InfiniBand Compliance Test Suite Test Description
84
CATC IBTrainer InfiniBand Exerciser, August 2002
Packet with Bad LVer
TD_10.2.4.1.3
TD_10.3.1.1.3
Item Value
Name TD_10.2.4.1.3
Description The test is used to ensure that the DUT does not re-
spond to a packet with invalid settings in the LRH
field ‘LVer’.
Topology Simple
Initial link state Active
Assertions v1c07-007#01.03
DUT Channel Adapter
Prerequisites SanityCheck
Test procedure Sending SubnDirectGet(PortInfo) SMPs to the DUT
with the 'LVer'-field in the LRH set to the invalid
values 1-15. No response expected.
Item Value
Name TD_10.3.1.1.3
Description The test is used to ensure that the DUT does not re-
spond to a packet with invalid settings in the LRH
field ‘LVer’.
Topology Simple
Initial link state Active
Assertions v1c07-009#01.03
DUT Switch, Router
Prerequisites SanityCheck
Test procedure Sending SubnDirectGet(PortInfo) SMPs to the DUT
with the 'LVer'-field in the LRH set to the invalid
values 1-15. No response expected.