Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 51)

Viewing the Results Testing with the User Interface
CATC IBTrainer InfiniBand Exerciser, August 2002
51
Example of Pattern Matching
Scenario Let’s say the following InfiniBand packet is transmitted from the DUT to
the VL0 virtual lane of the IBTrainer:
We want to reroute this packet to the memory block of the receive
memory and compare its payload with a given value.
How to To set up a pattern matcher on the payload’s part of this packet:
1 First, set up the Generator’s settings to dispatch all packets arriving on
VL0 to the memory block:
– Select Generator>Configure VLs.
– Select the enabled check box facing to VL0, and click the memory
option.
– Click Ok.
2 Select Generator>Configure Patterns, and set the following values:
These values correspond to the following:
– The offset of 5 DWORDS (20 bytes) ensures that only the payload of
the packet is considered.
Packet structure Contents
LRH - 8 bytes 0x00 0x02 0x00 0x00 0x00 0x07 0x00 0x00
BTH - 12 bytes 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Payload - 4 bytes 0x54 0x65 0x73 0x74