Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 83)

Test Description Using the InfiniBand Compliance Test Suite
CATC IBTrainer InfiniBand Exerciser, August 2002
83
TD_10.3.1.1.8
Item Value
Name TD_10.3.1.1.8
Description The test is used to ensure that the DUT does not re-
spond to a packet where the ‘EGP’ of this packet is
replaced by an invalid code group, ‘SLP’, and ‘SDP’.
Topology Simple
Initial link state Active
Assertions v1c07-009#02.01 v1c07-009#02.02
DUT Switch; Router
Prerequisites SanityCheck
Test procedure 1 A SubnDirectGet(PortInfo) packet is sent out, but
with an invalid code group instead of 'EGP' (End of
Good Packet). No response is expected.
2 A SubnDirectGet(PortInfo) packet is sent out, but
with 'SLP' (Start of Link Packet) instead of 'EGP'
(End of Good Packet). No response is expected.
3 A SubnDirectGet(PortInfo) packet is sent out, but
with 'SDP' (Start of Data Packet) instead of 'EGP'
(End of Good Packet). No response is expected.