4 go to usb2.0 – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 141
Advertising
USB Protocol Suite User Manual
Chapter 6: Searching Traces
LeCroy Corporation
127
6.4 Go To USB2.0
The Go To USB2.0 feature takes you directly to an event in a Trace.
Step 1 Select Go To USB2.0 under Search on the Menu Bar to display the
Go To USB2.0 drop-down menu. For 2.0 data, the menu is:
Step 2 Select the event you want to go to and enter the necessary information.
The resulting item will be shown as selected in the view.
Advertising
This manual is related to the following products: