5 application startup, 1 confirm proper hardware installation and usb or, Ethernet connection – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 70: Application
Chapter 3: Installation
USB Protocol Suite User Manual
56
LeCroy Corporation
3.5 Application Startup
To start the application, launch the LeCroy USB Protocol Suite program from the
Start Menu:
Start > Programs > LeCroy > USB Protocol Suite > USB Protocol Suite
to open the main window.
You can use the software with or without the system connected to the host. Without the
Analyzer, the program functions as a trace viewer to view, analyze, and print trace files.
3.5.1 Confirm Proper Hardware Installation and USB or
Ethernet Connection
USB Connection
For USB connection, after you open the USB Protocol Suite application, confirm proper
installation and USB connection by selecting About from the Help menu to view the
Software Version, Firmware Version, BusEngine™ Version, and Unit Serial Number in
the About window.
Ethernet Connection (Voyager only)
For Ethernet connection, after you open the USB Protocol Suite application, confirm
proper installation and Ethernet connection using the Analyzer Devices dialog and the
About window.