Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 251)

USB Protocol Suite User Manual Chapter 10: Recording Options
LeCroy Corporation
237
10.2 Recording Options - Misc. USB 2.0 (Voyager,
Advisor T3, USBTracer/Trainer, and Mobile)
The Misc. USB 2.0 page presents options for setting:
• Analyzer Trace Speed: Select Auto-Detect, Low, Full, or High.
• USB On-the-Go: Check On-the-Go SRP. Optionally select
Dual Role Devices as 2 DRD’s and enter device names. Optionally assume
that B is the first host.
• Generator/Analyzer Clocking Overrides: Select Slow Clock and enter
number of megahertz. Note: Auto-Detect mode does not allow Slow Clock.
• Generator-related Parameters: Choose parameters and device address
location.
• Options: Truncate data fields
Note: USB 2.0 Device Emulation is not supported in USB Protocol Suite
release 3.50.