Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 28)

Chapter 1: Overview USB Protocol Suite User Manual
14
LeCroy Corporation
Please refer to the Universal Serial Bus Specification, version 2.0 for details on the
protocol. The USB specification is available from the USB Implementers Forum (USB-IF)
at:
1.3.2 USBTracer/Trainer Features
General
• Fully complies with USB specification revision 2.0.
• Supports Link Power Management extension to USB 2.0 specification.
• Allows reconfigurable hardware for future enhancements.
• Has field-upgradeable firmware and recording engine.
• Supports all USB speeds (480 Mb/s, 12Mb/s, and 1.5 Mb/s).
• Has dual recording channels to aid development of multiple speed functions
upstream and downstream of speed-matching hub or transaction translator.
• Displays bus traffic using color and graphics in the CATC Trace interface.
• Has free non-recording, view-only Trace Viewer software.
• Comes with online manual.
• Self-diagnoses at power on.
• Has a 36-month warranty and hot-line customer support.
• Works in conjunction with the LeCroy USBTrainer USB Traffic Generator hardware
module to create a fully customizable USB test platform.
Physical Components
• Hardware module for the LeCroy Universal Protocol Analyzer System
• Desktop or portable Microsoft Windows XP, Windows Vista 32, Windows Vista 64,
or Windows 7 (32 or 64) computer with USB capability
• Plug-and-Play USB installation
• High-impedance tap: Inserts non-intrusively in any branch of a USB system.
• 512 MB of physical data-recording memory
• Two all speed (Low, Full, or Hi-Speed) recording channels
• Full-Speed USB connection to desktop or portable host PC. Hi-Speed on
UPAS 2500H platform.
• Internal wide-range AC power supply
• Break-out board to interface to external test equipment
USB Implementers Forum
1730 SW Skyline Blvd.
Suite 203
Portland, OR 97221 Tel: +1/503.296.9892
Fax: +1/503.297.1090
Web: http://www.usb.org/