Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 95)

USB Protocol Suite User Manual Chapter 4: Software Overview
LeCroy Corporation
81
4.3.6 Generator (Traffic Generation for USB 3)
(See “Traffic Generation (3.0 Exerciser)” on page 307)
4.3.7 Generator (Traffic Generation for USB 2)
(See “Traffic Generation (2.0)” on page 277)
4.3.8 View Level
(See “Switch to Transactions View” on page 108 and following)
Go to
USB 3.0
Exerciser
window.
Manual Trigger
Display
Export to
Script dialog.
Repeat Upload
Start or Stop Traffic Generation
(available if you have the
Traffic Generation module).
Bitstream and Intelliframe modes
Repeat Mode. This button becomes active
when a traffic generation file (*.utg) is
open.
Display Packets
See “Trace View Features” on page
93. Display Device Wire Adapter
Segments
See “Switch to Device Wire Adapter
Segment View” on page 116.
Display Transactions
See “Switch to Transactions View”
on page 108. Display Device Wire Adapter
Transfers
See “Switch to Device Wire Adapter
Transfer View” on page 116.
Display Split Transactions
See “Switch to Split Transaction
View” on page 112. Display PTP Transactions
See “Switch to PTP Transactions” on
page 117.
Display Transfers
See “Switch to Transfer View” on
page 112. Display PTP Objects
See “Switch to PTP Object
Transfers” on page 117.
Display Host Wire Adapter
Segments
See “Switch to Host Wire Adapter
Segment View” on page 115. Display PTP Sessions
See “Switch to PTP Sessions” on
page 118.
Display Host Wire Adapter Transfers
See “Switch to Host Wire Adapter
Transfer View” on page 116.
Display SCSI Operations
WA Group
Click the arrow to display the
Wire Adapter Levels. PTP Group
Click the arrow to display the
PTP Levels