Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 254)

Chapter 10: Recording Options USB Protocol Suite User Manual
240
LeCroy Corporation
10.3 Recording Options - Misc. USB 3.0 for Voyager
The Misc. USB 3.0 tab presents options for setting Recording Ports, Descrambling,
Polarity Inversion, Spread Spectrum Clock, Recording/Generating, Simple Filters and
Truncate Data Fields, Simple Triggers, Clock/Speed Selection, and M3i Connector
Termination/RxDetect.
For Recording Ports, select USB 3.0 Connectors, MMCX, or
Custom (DS:USB 3.0, US:USB 3.0). The custom option allows you to change the
recording channels to use a mix of MMCX and USB 3.0 connectors.
For Descrambling, Downstream and/or Upstream, select On, Off, or Auto.
For Polarity Inversion, Downstream and/or Upstream, select On, Off, or Auto.
For Spread Spectrum Clock, select Transmit (Exerciser) to apply Spread Spectrum
Clocking to the transmitter. To adjust the receivers to be more tolerant to
Spread Spectrum Clocking, select Receive.
Note: The Transmitter and Receive commands are independent of each other.