2 analyzer devices – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 71
USB Protocol Suite User Manual
Chapter 3: Installation
LeCroy Corporation
57
3.5.2 Analyzer Devices
To show the available Analyzer Devices, select Setup > All Connected Devices to
display the Analyzer Devices dialog.
The dialog displays the Device, Location, and Status.
You can click:
•
About to display device information (see “Software, Firmware, and
BusEngine Revisions” on page 345).
•
Update Device (see “Manual Updates to Firmware, BusEngine, and
Serdes BusEngine” on page 350)
•
Update License (see “Updating the Software License” on page 352)
•
Connect to display the Connection Properties dialog, in which you can set the
system to:
- Automatically connect to the device.
- Ask to connect to the device.
- Take no action.
•
Add Device to display the Add Ethernet Attached Device dialog, in which you
can enter an IP Address.
•
IP Settings to use a DHCP or Static IP address.
To refresh the list of devices, click Refresh Device List.
Before starting recording, select the Analyzer you want to use for recording.