Teledyne LeCroy UWBTracer User Manual - Manual (Page 192)

Chapter 11: Setting Up for Recording UWBTracer/Trainer User Manual
174
LeCroy Corporation
Step 3 Select the WUSB Settings tab, then enter the correct CHID for the WUSB host
or CDID for the WUSB device:
Figure 11.9 Device Type Specific Settings Tab with CHID or CDID
Step 4 Click the Add button to open the Add Connection Context dialog box, then enter
the correct CDID for the WUSB host or CHID for the WUSB device and enter CK,
and then click OK:
Figure 11.10 Entering CDID or CHID and CK
Step 5 Repeat Step 4 for each additional Connection Context you want to specify.
Step 6 Click OK to save changes and return to the General Settings tab.
Step 7 Repeat Steps 2 through 6 for each device you want to track.
Step 8 Click OK to save changes and exit the Add New Device or Edit Device dialog
box.