Teledyne LeCroy UWBTracer User Manual - Manual (Page 279)

UWBTracer/Trainer User Manual Chapter 15: Creating and Editing Generation Files
LeCroy Corporation
261
•
SeqNum: Enter an integer. Default is 0.
•
FragNum: Enter an integer. Default is 0.
•
AccMthd: Select from list.
•
MoreFrms: Select from list.
•
Duration: Enter an integer. Default is 0.
•
MacAddrLower: Enter an integer. Default is 0.
•
MacAddrUpper: Enter an integer. Default is 0.
•
SlotNumber: Enter an integer. Default is 0.
•
SecurityMode: Select from list.
•
Reserved_BP: Enter an integer. Default is 0.
•
Signaling Slot: Select from list.
•
Movable: Select from list.
•
IE_ID: Select from list.
•
BPOIE_IE_CODE: Enter a code.
•
BPOIE_Len: Enter an integer. Default is 0.
•
BPOIE_val: Enter an integer. Default is 0.
•
RSSI_Lo: Enter an integer. Default is 0.
•
RSSI_Hi: Enter an integer. Default is 0.
•
LQI_Lo: Enter an integer. Default is 0.
•
LQI_Hi: Enter an integer. Default is 0.
•
Duration_Lo: Enter an integer. Default is 0.
•
Duration_Hi: Enter an integer. Default is 0.
•
Reserved_0: Enter an integer. Default is 0.
•
Errors: Enter an integer. Default is 0.