Teledyne LeCroy UWBTracer User Manual - Manual (Page 194)

Chapter 11: Setting Up for Recording UWBTracer/Trainer User Manual
176
LeCroy Corporation
Step 3 Select the Temporal Key tab:
Figure 11.13 Temporal Key Tab
Step 4 Click the Add button to open the Add Temporal Key dialog box, then enter the
correct TKID and TK for the device in the proper format, and then click OK:
Figure 11.14 Entering TKID and TK
Step 5 Repeat Step 4 for each additional Temporal Key you want to specify.
Step 6 Click OK to save changes and return to the General Settings tab.
Step 7 Repeat Steps 2 through 6 for each device you want to track.
Step 8 Click OK to save changes and exit the Add New Device or Edit Device dialog
box.
Step 9 Make sure that the device has the DUT box checked (see Figure 11.11).
Step 10 Click the Program Security Data toolbar button (see Figure 11.12) to send
changes to the analyzer.