Teledyne LeCroy UWBTracer User Manual - Manual (Page 71)

UWBTracer/Trainer User Manual Chapter 4: Reading Traces
LeCroy Corporation
53
4.4 Trace Level Views for WLP
You can display traces at these viewing levels, listed from lowest to highest:
• WiMedia Frames [default]
• WLP Frames (WLP)
• WLP Ethernet Protocol Units (WN ETH)
• WLP IP Protocol Units (WN IP)
WiMedia Frame Level
The WiMedia Frame view is the default decode level. It shows the WiMedia Frame Raw
Payload and PHY/MAC Headers. An example WiMedia Frame level is in Figure 4.9.
Figure 4.9 Trace View: WiMedia Frame Level
WLP Frame Level
Click the WLP button to show the WLP Frame view. An example WLP Frame level is in
Figure 4.10.
Figure 4.10 Trace View: WLP Frame Level