Vanguard ATRT-01_01B S3 - Manual (Page 20)

ATRT-01/01B S3 USER’S MANUAL REV 1
16
3.3 Setting the Date and Time
To set the date and time:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[5]
key (SET TIME)
c. The following screen will be displayed:
Type in the date using the alpha-numeric keypad. The following screen will be displayed:
Enter the time using the alpha-numeric keypad. When the time has been entered, you
will be immediately returned to the “START-UP” menu.
ENTER TIME
HH:MM:SS
ENTER DATE
MM-DD-YY
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. SET LANGUAGE
1. TEST TRANSFORMER
2. SETUP
3. CALCULATOR
time: 14:21:34
date: 05/24/11