Vanguard ATRT-01_01B S3 - Manual (Page 39)

REV 1 ATRT-01/01B S3 USER’S MANUAL
35
3.7 Working With Test Records
3.7.1. Viewing the Contents of the Working Memory
Whenever a test is performed or a test record is retrieved, the data is stored in the ATRT’s
working memory. You can view the test data using the steps below:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (PRINT RECORD).
c. The basic test record information will be displayed as shown:
Press the
[Contrast ∨]
key. The test record details will be displayed as shown below:
Press the
[STOP]
key to return to the “START-UP” menu.
1 SINGLE PHASE
40 volts
RATIO ma %DIFF
1.003 0002 0.3
SINGLE PHASE
Num Tests: 1
05/26/11 15:33:58
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. SET LANGUAGE
1. TEST TRANSFORMER
2. SETUP
3. CALCULATOR
time: 14:21:34
date: 05/24/11