Vanguard ATRT-01_01B S3 - Manual (Page 29)

REV 1 ATRT-01/01B S3 USER’S MANUAL
25
d. The following screen will be displayed:
Press the [START] key to start the test.
e. The following screen will be displayed while the test is being performed:
The test results will be displayed on the LCD screen when testing has finished:
NOTE
The percentage error (ERR) will be displayed only if name plate voltage values
were entered.
The polarity is displayed as either a plus sign (+) for “in-phase” or a minus sign (-) for
“out-of-phase”.
Press any key to continue.
RAT: +1.003
PHS: 0.02
°
mA: 0.0
ERR: 0.05
%
TESTING AT 40 VOLTS
TEST IN PROGRESS
PLEASE WAIT...
"START" TO TEST
OR
"STOP" TO ABORT