Vanguard ATRT-01_01B S3 - Manual (Page 46)

ATRT-01/01B S3 USER’S MANUAL REV 1
42
3.7.4. Restoring a Test Record From a USB Flash Drive
Use the steps below to restore a test record from a USB Flash drive to the ATRT’s working
memory:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the ATRT’s USB
Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [4] key (SAVE/RESTORE RECORD)
c. The following screen will be displayed:
Press the [1] key (RESTORE RECORD).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. SET LANGUAGE
1. TEST TRANSFORMER
2. SETUP
3. CALCULATOR
time: 14:21:34
date: 05/24/11