Vanguard ATRT-01_01B S3 User Manual
Page 33
REV 1 ATRT-01/01B S3 USER’S MANUAL
29
d. The following screen will be displayed:
Select the transformer configuration by pressing the corresponding key (
[1]
to
[6]
). For
this example, press the
[1]
key (Dy1).
e. The following screen will be displayed:
NOTE
Option 3 (USE PREV DATA) will be listed only if you had provided name plate
voltages for a previous test.
1. YES
Press the
[1]
key (YES) if you would like to enter the transformer name plate
voltage values. The following screen will be displayed:
Type the H winding name plate voltage value using the numeric keypad. The
screen will be updated as shown:
Press the
[ENTER]
key. The following screen will be displayed:
NAME PLATE VOLTAGE:
H : X
500 :
NAME PLATE VOLTAGE:
H : X
0 :
NAME PLATE VOLTAGE?
1. yes
2. no
3. USE PREV DATA
1. DY1
2. DY3
3. DY5
4. DY7
5. DY9
6. DY11