Vanguard ATRT-01_01B S3 - Manual (Page 42)

ATRT-01/01B S3 USER’S MANUAL REV 1
38
3.7.3. Restoring a Test Record From Flash EEPROM
Use the steps below to restore a test record from the ATRT’s Flash EEPROM to the working
memory:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the ATRT.
Press the
[1]
key (RESTORE RECORD).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. SET LANGUAGE
1. TEST TRANSFORMER
2. SETUP
3. CALCULATOR
time: 14:21:34
date: 05/24/11