Vanguard ATRT-01_01B S3 User Manual
Page 28
ATRT-01/01B S3 USER’S MANUAL
REV 1
24
Type the H winding name plate voltage value using the numeric keypad. The
screen will be updated as shown:
Press the
[ENTER]
key. The following screen will be displayed:
Type the X winding name plate voltage value using the numeric keypad. The
screen will be updated as shown:
Press the
[ENTER]
key. Continue to step d.
2. NO
Press the
[2]
key (NO) if you do not want to enter the transformer name plate
voltage. Continue to step d.
3. USE PREV DATA
Press the
[3]
key (USE PREV DATA) to use the name plate voltage values entered
when performing the last test. Continue to step d.
NAME PLATE VOLTAGE:
H : X
500 : 10
NAME PLATE VOLTAGE:
H : X
500 : 0
NAME PLATE VOLTAGE:
H : X
500 :
NAME PLATE VOLTAGE:
H : X
0 :