Vanguard CT-8000 S3 User Manual
Page 30
CT-8000 S3 USER’S MANUAL
REV 1
25
3.2.2. Setting the Clock
Follow the steps below to set the CT-8000 S3’s internal clock:
a. Start from the “START-UP” menu:
Press the
[4]
key (SETUP).
b. The following screen will be displayed:
Press the
[5]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[1]
key (SET DATE & TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1.
SET DATE & TIME
2.
SET PRINT MODE
3.
SET 50/60 HZ
4.
SET LANGUAGE
5.
BLUETOOTH DEV RESET
6.
PREVIOUS PAGE
1.
ANALYSIS POINTS
2.
MEASUREMENT UNITS
3.
SHOT DESCRIPTION
4.
NUMBER OF CHANNELS
5.
NEXT PAGE
1.
RUN TEST 10/07/13
2.
GET RESULTS 10:15:25
3.
SAVE/RESTORE
4.
SETUP
5.
DIAGNOSTICS