Vanguard CT-8000 S3 User Manual
Page 46
CT-8000 S3 USER’S MANUAL
REV 1
41
3.2.10. Configuring the Digital Rotary Transducer Settings
A rotary transducer requires the user to enter the defined linear distance in millimeters or
inches per one degree of rotary motion. Follow the steps below to configure the settings for a
digital rotary transducer:
a. Start from the “START-UP” menu:
Press the
[4]
key (SETUP).
b. The following screen will be displayed:
Press the
[2]
key (MEASUREMENT UNITS).
c. The following screen will be displayed:
Press the
[3]
key (ROTARY ENCODER).
d. The following screen will be displayed:
ROTARY ENCODER:
1.
ENGLISH (In./deg)
2.
METRIC (mm/deg)
SELECT UNITS:
1.
ENGLISH
2.
METRIC
3.
ROTARY ENCODER
4.
RES ENCODER
1.
ANALYSIS POINTS
2.
MEASUREMENT UNITS
3.
SHOT DESCRIPTION
4.
NUMBER OF CHANNELS
5.
NEXT PAGE
1.
RUN TEST 10/08/13
2.
GET RESULTS 10:10:10
3.
SAVE/RESTORE
4.
SETUP
5.
DIAGNOSTICS