Agilent Technologies N2610A - Manual (Page 113)

Fiber Testing 4
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 105
3 Press OK. The Fiber Autotest Settings screen displays.
Setting the Length Limit
To set the length limit for fiber testing:
1 On the Fiber Autotest Settings screen, press Length Limit, then
press Edit. The Length Limit Setup screen displays.
2 Press the Fiber Length field. The numeric keypad opens.
3 Press the backspace arrow to erase the displayed value, then enter
the new limit value. Press OK. The keypad closes.
4 Press OK. The Fiber Autotest Settings screen displays.