Agilent Technologies N2610A - Manual (Page 74)

66 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Setting Up an Autotest
2 To set the beginning number to other than 1, press the Enter Start
Value
field. The onscreen keyboard opens.
3 Press the backspace arrow to erase the number in the display, then
press the number keys to enter the new starting number. Press OK.
The keyboard closes, and the new starting number appears in the
Enter Start Value
field.
4 To set the number of cable runs to label and test, press the Enter
End Value
field. The onscreen keyboard opens.
5 Press the backspace arrow to erase the number in the display, if any,
then press the number keys to enter the new number. Press OK. The
keyboard closes, and the new ending number appears in the Enter
End Value
field.
6 Press OK. The Autotest Setup screen displays.