Agilent Technologies N2610A - Manual (Page 132)

124 Agilent FrameScope 350 User’s Manual
5 Cable Testing in Expert Mode
The Expert Autotest Setup
3 Then on the Limit Setup screen, select the desired cabling system
performance grade.
I‚‡r) UurÆp ‚yyÃih Г‚Г‡urГ vtu‡Ã‚sÇurÆp rrÃ†u‚†Ã‡urÃy‚ph‡v‚Ã‚sÇurÃqh‡hÆu‚ÃhqГv†Г‚‡Г
hГsˆp‡v‚hyÆp ‚yyÃih ГU‚Г†p ‚yyȆrÇurÆp ‚yyà ‚pxr Гh‡Г‡urÃy‚r à vtu‡Ã‚sÇurÃ
A h€rTp‚ƒr
4 Then press Next. The next Limit Setup screen allows you to select
Link
or Channel test configuration.
Viewing Probe Information
The FrameScope can display details about the probes inserted
in the tester. If the probes are SmartProbes, the information
includes the number of tests the probes have performed.
To view detailed information on the probe currently inserted:
1 In Expert mode, press Autotest on the Main Menu. The Autotest
Setup screen displays.