Agilent Technologies N2610A - Manual (Page 86)

78 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Running an Autotest
Running an Autotest
To run an autotest:
1 If this is the first test of the day or after a long break, calibrate the
tester. See
“Calibrating the Tester” on page 61.
2 Connect the FrameScope 350 and Dual Remote 350 to the ends of the
circuit needing certification.
3 On the FrameScope Main Menu, press the button identifying the
selected test. The test executes.
I‚‡r) DsÁ‚Ãpuhtr†Ãr rÀhqrǂÇurÃqrshˆy‡Ã‡r†‡vtƇhqh q†Г‚ Гƒ ‚svyr†ÇurÃHhvГHrˆГ
†u‚†Ãiˆ‡‡‚†Гs‚ Г8h‡rt‚ ’Ã$@ÃhqÃ8h‡rt‚ ’Г%Г‡r†‡†ÃDsÇurÃQ ‚svyrÃuh†ÃirrÃpuhtrqÃ
‡urÃHhvГHrˆГ†u‚†Ã‚y’rÇr†‡Ãiˆ‡‡‚Ãvqvph‡vtÇurÁrÃ‡r†‡Ãƒ ‚svyr
4 If the autotest passes, the screen will look like this:
5 To save the test results, see “Saving Test Results” on page 79