Agilent Technologies N2610A - Manual (Page 126)

118 Agilent FrameScope 350 User’s Manual
5 Cable Testing in Expert Mode
Changing to Expert Mode
Changing to Expert Mode
To change the FrameScope from standard configuration to
Expert mode:
1 On the Main menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press User Interface, then press
Edit
. The User Interface Setup screen displays.
3 On the User Interface Setup screen, press Expert Mode to turn it on
(a check mark will appear in the box,) then press OK. The System
Settings screen displays.