Agilent Technologies N2610A - Manual (Page 120)

112 Agilent FrameScope 350 User’s Manual
4 Fiber Testing
Setting Up an Autotest
descriptions of connector types. If one of the stored
descriptions matches the connector being tested select it,
then press OK.
2 If not highlight Add New Description and press Next.
3 Enter the name to be added to the database and press Next.
4 Select the fiber connector type from the list of mono-fiber
connectors and multi-fiber connectors shown or select
Unspecified. Press OK and the Fiber Autotest Settings screen
displays with the new connector description beside the
connector icon.