Measuring length and delay, Using the power meter – Agilent Technologies N2610A User Manual
Page 159
Advertising
Expert Fiber Testing
6
The Fiber Tools Menu
Agilent FrameScope 350 User’s Manual
151
4
To select the test configuration or to specify the fiber type, press
Quick Setup
.
Measuring Length and Delay
To use the Length & Delay tool:
1
On the Fiber Tools menu, press Length & Delay. The Fiber Length
Test screen displays. If a valid fiber connection is present, a Measure
button appears.
2
To begin the test, press Measure.
3
To select the test configuration, fiber type, or NVP, press Quick
Setup
.
Using the Power Meter
To use the Power Meter:
1
On the Fiber Tools menu. press Power Meter. You may be prompted
to calibrate upon entering this tool. This is not the same calibration as
Advertising