Agilent Technologies N2610A - Manual (Page 98)

90 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Printing Labels
Printing Labels
Printing Labels On Site
The FrameScope 350 can print labels directly to a Brady TLS2200 label
printer. The labeling parameters are set using the procedure
“Choosing
the Labeling Format” on page 64. When the FrameScope is configured as
described in the following procedure, a label for the tested cable will be
printed after saving a test result.
To configure the FrameScope 350 to print to the Brady label printer:
1 On the Cable Main Menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press Autoprint, then Edit. The
Printer Setup screen displays.