WolfVision EYE-14 User Manual - Manual (Page 25)

24
MAINTENANCE
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint-free cloth.
LENS: Clean the lens by gently wiping them with a soft, lint-free cloth (do not use a paper tissue!).
Clean by breathing on the lens to create moisture then wipe with lint-free cloth (If not clean, use
special optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and anti-reflex coating!
IMPORTANT
The firmware (software) of your EYE-14 (including the o ) can easily be upgraded to the
latest version. The firmware update can be done via USB, Ethernet (LAN) or USB stick.
Firmware update files can be downloaded free of charge at www.wolfvision.com (Support)
Updates via USB or Ethernet/LAN can be made with the software vSolution Link by WolfVision.
Updates via USB stick need the firmware file to be placed in the folder root:\WOLFVISION\
(default folder can be changed in the on-screen menu Advanced Settings / USB Settings).
Alternatively, the firmware update can be started in the on-screen menu (Advanced Settings / Device Info),
provided the EYE-14 is connected to the Internet and a nameserver IP address is assigned (Advanced
Settings / Ethernet Settings). By selecting the line ”Check For FW Update”, the EYE-14 checks the
WolfVision server for newer firmware files. Follow the on-screen instructions to start the update process.
n-screen HELP
Firmware Upgrades
Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects
situated between the EYE-14 and the infrared remote control, and weak batteries, interfere with reception.
Infrared Remote Control
CAUTION
Risk of explosion if batteries are replaced by an incorrect type.
Dispose of used batteries according to the instructions. Recycle the batteries.
ATTENTION
Il y a danger d‘explosion s‘il y a remplacement incorrect de la batterie. Remplacer uniquement avec une
batterie du même type ou d‘un type équilanent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Recycler les batteries.
If the EYE-14 can only be controlled from a close distance, you may need
to change the batteries.
If the EYE-14 cannot be controlled at all with the infrared remote control,
you may need to check the code (see page 5) or to change the batteries.
Open the cover on the back of the remote control and replace both 1.5V
AAA (Code LR03) batteries with new ones of the same type.
Check the polarity of the batteries!
Please make sure that you pack up the EYE-14 in the supplied box.
This is very important to avoid damage to sensitive parts of the unit!
Packaging / Transportation
IMPORTANT