XLT XD-9004E - Manual (Page 18)

Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
18 OVEN ELECTRICAL REQUIREMENTS
FOR EACH OVEN:
 A separate 20A circuit breaker must be provided for each oven deck.
 Electrical connections must be accessible when the ovens are in the installed position.
 Electrical connections must meet all local code requirements.
All values shown this page are per each oven
 When installed, the appliance must be electrically grounded in accordance with
local codes, or in the absence of local codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable.
 This appliance is equipped with a three-prong (grounding) plug for your protec-
tion against shock hazard & should be plugged into a properly grounded three-
prong receptacle. Do not cut or remove the grounding prong from this plug
.
Electrical Grounding Instructions
World Ovens
 This appliance is equipped with a ground lug for your protection against shock
hazard & must be properly grounded.
 When installed, the appliance must be electrically grounded in accordance with
local codes.
Australian Ovens
 This appliance is equipped with a ground lug for your protection against shock
hazard & must be properly grounded.
 The electrical service must be installed in accordance with AS/NZS 3000 Wir-
ing Rules.
Standard Ovens
HIGH
VOLTAGE
Volts AC Amps Hertz Volts AC Amps Hertz Volts AC Watts Hertz
1832 6 3
1855 6 3
2440 6 3
3240 6 3
3255 6 3
3270 6 3
3270-2B 12 6 1320
3855 6 3
3870 6 3
3870-2B 12 6 1320
50
120 VAC
1Φ
60
220/230/
240 VAC
1Φ
220 VAC
1Φ
660
660
Oven
Model
Australia & World Standard
Gas Oven Electrical Requirements
Per EACH Oven
Korea
60