C.2.5 create factory default image – IEI Integration KINO-QM57A User Manual
Page 136
KINO-QM57A Mini-ITX SBC
Page 122
C.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1:
Turn on the system. When the following screen displays (
78
Figure A-2), press the
<F3> key to access the recovery tool. The message will display for 10 seconds,
please press F3 before the system boots into the operating system.
Figure C-10: Press F3 to Boot into Recovery Mode
Step 2:
The recovery tool menu appears. Type <4> and press <Enter>. (
78
Figure A-3)
Figure C-11: Recovery Tool Menu
Step 3:
The About Symantec Ghost window appears. Click OK button to continue.