IEI Integration KINO-QM57A - Manual (Page 80)

KINO-QM57A Mini-ITX SBC
Page 66
Figure 4-15: Audio Connector
Step 3: Check audio clarity. Check that the sound is coming through the right speakers
by adjusting the balance front to rear and left to right. Step 0:
4.8.2 LAN and USB Connection
There are two external RJ-45 LAN connectors and four USB connectors on the
KINO-QM57A. The RJ-45 connectors enable connection to an external network. The
external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices and LAN cable to
the KINO-QM57A.
Step 1: Locate the RJ-45 and USB connectors. The locations of the RJ-45 and USB
connectors are shown in Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-QM57A.