IEI Integration KINO-QM57A - Manual (Page 71)

KINO-QM57A Mini-ITX SBC
Page 57
The COM 4 Function Select jumper sets the communication protocol used by the second
serial communications port (COM 4) as RS-232, RS-422 or RS-485. The COM 2 Function
Select settings are shown in Table 4-4.
Setting Description
Short 1-2 RS-232 Default
Short 3-4 RS-422
Short 5-6 RS-485
Table 4-4: COM 4 Function Select Jumper Settings
Figure 4-8: COM 4 Function Select Jumper Location
4.5.4 LVDS Panel Resolution Jumper
Jumper Label: J_PID1
Jumper Type: 8-pin header (2x4)
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-9
The LVDS Panel Resolution jumper allows the resolution of the LVDS screens connected
to the LVDS1 connector to be configured. The LVDS Panel Resolution jumper settings are
shown in Table 4-5.