IEI Integration KINO-QM57A - Manual (Page 74)

KINO-QM57A Mini-ITX SBC
Page 60
4.5.6 ME RTC Register Jumper
Jumper Label: J_ME_RTC1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-7
Jumper Location: See Figure 4-11
The ME RTC Register jumper saves or clears the ME RTC registers. The ME RTC
Register jumper settings are shown in Table 4-3.
Setting Description
Short 1-2
Save ME RTC registers
(normal operation)
Default
Short 2-3 Clear ME RTC registers
Table 4-7: ME RTC Register Jumper Settings
Figure 4-11: ME RTC Register Jumper Location